That’ll Be Easy (A Crafter’s Saga 4)

I’m sure you know where this is heading, so I will spare you the shredded details.

I went down to the basement and used my old-fashioned wooden, elementary school in the 70’s, slicing block with lever.

You know, the one where my teacher told us to be very careful when we used it, and then almost immediately nipped her finger. I was terrified of that thing.

I store it in the drawer above the fabric drawer. I don’t take it out there, though. I just pull the drawer out far enough and use it just where it is. Awkward? Of course! Time-saving? Meh. But, the paper scraps are retained, nicely. While I was there, I did some smart thinking and chopped all of the ink layer rectangles, too.

That was actually easy. While it’s fun to be fancy, sometimes the primitive stuff works reliably better.

Next step: stampede stamping the ink layers and the white card stock.

Easy enough after a few, totally expected, crooked and over-lap pressings. (Pssst. Crafter’s secret: that’s why we have extra pieces and supplies and left-over small amounts of pieces and supplies, which we faithfully store. Though, they will likely never be needed.)

Now, onto the super-fun and exciting part! Punching out 240 or so maple leaves from my two-days-prior poured acrylic swirls on ugly neon yellow card stock that I couldn’t imagine any other use for all these post-store years.

Ah, the hand held assistive apparatus owned for at least 19 years. It had to have been used at least once before. Otherwise, I wouldn’t have looked at it and recalled it to be a bit-sticky, like new dies are. I knew it just needed to be used to loosen it up.

It’s probably a bit of a spoiler to let you know I looked up the answer to a question I should have asked before I began this step, but here you go, anyway: Acrylic paint is a fast-drying paint made of pigment suspended in acrylic polymer emulsion and plasticizers, silicon oils, defoamers, stabilizers, metal soaps. Acrylic paints are water-soluble, but become water-resistant when dry.

Word to the wise: they become punch resistant, too. Although, that wasn’t perfectly clear to my creative genius until my hand started cramping. Not to be deterred, I switched hands. Following a few fumbles, I decided I could place the punch on the coffee table, squat-up to apply appropriate pressure and get some glute work in there, too.

A few struggle-shapes in I had a few logical visions.

  1. a scenario where I would end up with a pulverized slate tile, leaving a gaping gap in my living room decor.
  2. it was gonna take a while, but eventually, the pressure needed would be lessened.
  3. if I continued this way, not only was I still flirting with destructive danger, but my hands would hate me.

Interesting illogical resolutions:

  1. placing a thick (slippery, duh) glossy magazine on the coffee table as a pressure cushion.
  2. adding a little olive oil (out of wd40) to ease the resistance away.
  3. continuing until my hands could no longer squash out a squeeze, switch gears to glue-running and assembly, then finish the rest tomorrow.

Re-thunk thoughts:

  1. don’t be a dolt. enough with the coffee table torture. find a different surface.
  2. how do you get oil completely off a creviced die-cut, will it rust if washed and why isn’t repeated action helping?
  3. 20 or so really pretty leaves in, a deadline reminder, and… ouch.

This is typically the time a crafter stops to reassess invested time vs future hours required against the likelihood of completing the project in time to make the necessary Sunday afternoon Post Box drop. Then, forges on to concoct an easier way to accomplish what must be accomplished. I subscribe to this process, because, I’ll be danged if I’m going to call wasted-time and walk away.

Quote for the Week”

The String Thing, 2

So, about the string thing….

There was this woman with a worthy JLo booty, and she changed my life. I know that sounds dramatic, but that one little piece of information made a big impact.

The infomercial shot cut away from the widely demographic group of this-is-for-everybody dancers back to the spokesperson. She offered an explanation followed by a demonstration on how to imagine a string coming from the top of your head.

The idea was to make sure you were holding your head in alignment with your body.  I stood up and tried it, and felt a difference. She also talked about the importance of working stomach muscles, again demonstrating some moves.

I didn’t buy the CD-set. Money was still questionable after closing the store and losing Jeff’s portion of our income. I kept thinking about it, though. Walking with the string thing gave me a different point of view. I tended to look down for sure footing. The string thing kept tugging my head back up.

I tried the string thing on the treadmill, and realized I was nowhere near balanced. It made the walk so much harder, I had to walk slower. Even setting myself back to 30 minutes, I would sweat rivulets. I used some of the dance moves in an awkward self-devised cool down, once I was back on the den floor.

A few steadier months in, I was bored and decided to spice up my life by executing those moves on the moving treadmill. I could do it, and I loved it! I would dance myself up and down the length, in perfect posture while belting out off-tune tunes. For variety , some nights I’d switch on the TV, usually already on the International Music Channel. The timing was such that I most often ran into a portion of the Bollywood hour on IMF. I have no idea how to properly belly-dance.Miss Fred probably thought I looked like a loon, but the dancing I was doing felt good.

Before I moved to Ann Arbor, I routinely treadmill danced 45 minutes to an hour almost every night. The result was 118 pounds lost and confidence in my movements gained.

The move, not being allowed to use my treadmill in a second floor apartment, changing positions at my job, the 5th anniversary of Jeff’s passing, and two surgeries set me back. One was the removal of my gall bladder, the other was repair of a hernia I gave myself on an elliptical.

I felt I wasn’t getting enough of a core workout, so I tried pedaling in a downhill skier stance. If I hadn’t had the first surgery, it might have been ok, but the weakened stomach muscles gave.

I never recovered my intense treadmill habit. I’d swim in the summer, walk outside in nice weather. I’d struggle to get the workout room, and then give up when it got too cold or snowy or icy or I just didn’t feel like it.

I’ve been battling the same 25 pound regain for 5 years, now. That’s 25 pounds more I have to lose to reach my BMI goal, totaling a 40 pound goal. January 2nd, 2017 I recommitted.  All fired up with an eclectic and eccentric playlist, I’m working my way back to treadmill dancing and more of the story of us.

Quote for the Week:2017-02-07-never-under-estimate-the-power-of-a-good-workout-mix-jakorte

Playlisting:

Pandora

Slacker

Fitness Magazine 100 Best Workout Songs